NORCOTE
HARD & FAST 25 RECOMMENDED USES back
to top
Vinyl,
Vinyl Asbestos, Thermoplastic, Asphalt Linoleum, Rubber, Composition,
Terrazzo. Marble, Finished Concrete, Quarry Tiles, Ceramic Tiles
and all sealed Wood and Cork Floors.
NORCOTE HARD & FAST 25 INSTRUCTIONS FOR USE back
to top
Make sure the floor is thoroughly clean by using Norsan Alkalene
before applying Norcote Hard & Fast 25. Apply the Hard & Fast
25 with a short string Flat Mop evenly to the floor surface. Allow
20 minutes drying time before applying a second coat.
Maintenance: Norfresh Floor Maintainer or Star 2000 is recommended.
Dust control floor areas first by using a synthetic sweeper or
a disposable sweeper cloth. Damp Mop spillage areas with either
of the maintainers which will leave the floor smear-free. Spray
Buff or Spray Clean Traffic Areas with either of the maintainers
to repair the floor surfaces to a high gloss finish. When floors
require a cleaner and fresher appearance scrub the floor with
either of the maintainers by using a Floor Machine. Pick up dirty
solution with a wet pick up machine or a mopping system then mop
over a stronger solution of either of the maintainers When dry,
buff the floor to achieve a floor dressing appearance.
Norcote Hard & Fast 25 can be removed from the floor by using
Norsan Alkalene or Starstrip 2000 Coverage 250 sq. metres per
5 litres approximately.
NORCOTE
HARD & FAST 25 HEALTH DATA back
to top
Handling
precautions:
Avoid contact with skin. May cause irritation to sensitive skin,
if frequent contact with unprotected skin wear protective gloves.
Avoid contact with eyes. This product should not be ingested.
KEEP OUT OF REACH OF CHILDREN.
First aid treatment
In the event of contact with skin wash with copious quantities
of water.
In
the event with contact with eyes. wash with copious quantities
of water.
In the event of ingestion, drink plenty of water and obtain medical
advice immediately.

TO PRINT THIS PAGE Press
(Control + P) on a PC or (Option + P) if using a Mac back
to top