POWER
PLUS INSTRUCTIONS FOR USE back
to top
General Cleaning:For heavy duty cleaning, including the
removal of solvent wax polish or compacted grease and oil, Power
Plus should be diluted at the rate of 1 cupful (200ml) to 5 litres
of cold water. This solution can also be used to remove extra
heavy build up of emulsion polish. If required a stronger solution
can be used. Half a cupful (100ml) to 5 litres is suitable for
cleaning oily or greasy floors and walls, machine degreasing,
or for removing emulsion polish. This versatile product at the
same dilution will clean all stone, marble, terrazzo. ceramic
and quarry tiles, kitchen walls and woodwork. Also recommended
for cleaning heavy soiled, untreated floors. Dilute 25ml Power
Plus to a 600ml Power Plus spraygun and then fill with water to
the 600ml mark. Provides the perfect answer for grease and dirt
removal on most surfaces Power plus leaves no residue.
Recommended for use on: PVC, Vinyl, Vinyl Asbestos, Thermoplastic,
Asphalt, Composition, Terrazzo, Marble, Concrete, Quarry Tiles,
Ceramic Tiles, and all Sealed Wood and Cork Floors. Although Linoleum
and Rubber should always be treated with care.
POWER
PLUS HEALTH DATA back
to top
Handling
precautions:Skin:
Avoid contact with skin. Wear protective gloves and clothing.
Avoid contact with eyes and face, Wear safety glasses or face
shield. This product should not be ingested. Will cause corrosive
damage to mouth, throat and gastrointestinal tract. Keep away
from food or sources that could be ingested. KEEP OUT OF REACH
OF CHILDREN.
First aid treatment
In the event of contact with skin, wash with plenty of water.

TO PRINT THIS PAGE Press
(Control + P) on a PC or (Option + P) if using a Mac back
to top