REMOVER Concentrated acidic descaler Product Number N15405

General Description Remover is a concentrated acidic cleaner and descaler with special additives to speed action and penetration of the most stubborn deposits. Inhibitors help to prevent fuming and minimise attack on bare metal surfaces. Suitable for the removal of excess mortar and concrete from ready mix trucks, concrete mixers and scaffolding. It will also remove heavy concrete or cement deposits on face brickwork as well as dissolving rust and corrosion on most metal surfaces.

REMOVER INSTRUCTIONS FOR USE back to top

General Cleaning: Use neat for difficult conditions or 1:10 with water if less severe. Brush solution onto the surface at arm's length. For severe soiling a wire brush may be needed. Rinse surface well with clean water afterwards. For removing cement or mortar from bricks, wet with water first then apply Remover at dilution of 1:20. Rinse surface well once the mortar has been removed.

REMOVER HEALTH DATA back to top

Handling precautions: Contains Hydrochloric Acid. Do not use with other cleaners or bleach. Avoid contact with skin. Will cause irritation. Wear protective gloves and clothing. Avoid contact with eyes, irritation will occur. Wear goggles/face shield.

First aid treatment

In event of contact with the eyes: irrigate the eye with water or eye wash solution for at least 10 minutes and seek medical attention.
In the event of contact with skin: flush with plenty of water and if irritation persists seek medical attention.
In the event of ingestion: give milk or water as a diluent. 15 mls per kilo of body weight to a maximum of 200-300ml and seek immediate medical attention.
In the event of inhalation: remove patient to fresh air and seek medical advice.

TO PRINT THIS PAGE Press (Control + P) on a PC or (Option + P) if using a Mac back to top